The Motorola Edge 30 has a repairability score of 6.5 out of 10. The device requires the use of a heat gun or hair dryer to loosen the adhesive underneath the back plate and a plastic pry tool to pry it off. The Dual LED flash front-facing camera main camera and other components are connected to the main board via flex cables which need to be disconnected. The battery needs to be removed with isopropyl alcohol and the bottom cover needs to be removed to access the sub board. The fingerprint reader primary microphone bottom speaker and haptic feedback motor are all held down with adhesive and need to be carefully removed. The Copper Vapor chamber runs underneath the battery motherboard and camera.